TOE 8951 / TOE 8952
Single-Output and Dual-Output Power Supplies up to 400 W
Convenient performance for your applications in the field of:
- Research / development
- Laboratory / testing / experiments
- Production / test bays
- Quality assurance
- Service / training
400 W in compact design
The single-output and dual-output power supplies from the TOE 8950 range have an extremely compact design. As a result of the high efficiency of all units, the complete output power of 400 W is available without problem over wide voltage and current ranges at the front via safety sockets and at the rear via a screw-type terminal block.
Autoranging
Power supplies with autoranging can output their rated power over a wide and stepless range of voltage and current combinations.
Autoranging power supplies from TOELLNER have a significantly larger operating range than standard power supplies with the same output power.
Adjustment using incremental spinwheels
The output values are adjusted with a selectable resolution using wear-free incremental spinwheels, guaranteeing reliable and precise setting of all output parameters and operating functions even after many years of use.
Display
The set and measured values for voltage, current and power as well as the menu control functions are output on a 2-row LCD with 20 characters/row.
Highest degree of safety
is guaranteed for your applications by comprehensive protective measures: adjustable overvoltage protection, limit function, fast power OFF switching, polarity reversal protection, resistance to reverse current, various internal electronic monitoring functions.
Innovative sensing circuit
An innovative sensing circuit not only keeps the power supply to your load extremely constant, it even protects sensitive loads if there is a break in the sensor line. The sensing inputs are available at the rear.
Adjustable output power
The possibility for directly setting the power is a further exceptional feature of this series. The output power of 400 W with single-output power supplies or 2 x 200 W with dual-output power supplies can then be reduced down to 5 % of the maximum output power.
Tracking mode
With dual-output power supplies, automatic tracking permits control of the output voltage of part 2 as a function (0 – 100 %) of part 1 with retention of all control properties.
Digital and analog control interfaces
Digital: RS 232 / GPIB / USB / LAN
RS 232 and GPIB/USB/LAN (optional) interfaces with the following scope of functions are available for communication between PC and power supply:
- Adjustment of output values: voltage, current and power
- OVP and limit adjustment, autocal function, display, store and recall settings
- Switching on/off of output voltage
- Reading of actual values as well as warning/fault states
The command syntax complies with the IEEE 488.2 standard. Standardized SCPI commands are processed.
Fast analog control
The power supplies can be controlled in analog mode; i.e. the output voltage and current can be adjusted independent of one another using externally applied control voltages.
Short adjustment times for the output voltage are implemented using balanced circuitry.
It is therefore possible to generate powerful and fast output signals without problem; up to approx. 700 Hz at 2 Vpp.
Interlock
By interrupting the interlock circuit, e.g. by an external emergency stop switch, the power supply output becomes deenergized directly.
Output ON/OFF
A convenient feature is the output switchoff function which at standby permits immediate reduction of the voltage and current values to 0 V and 0 A. When the output key is activated, the set or programmed values for voltage and current are present immediately. The switchover can be carried out manually, via a remote control command from the PC, via an external TTL signal1) or via an external switching contact1).
1) Interlock or inhibit option required
Autocal-funktion
The power supplies are equipped with a self-calibration function protected by a ”security code”. This function can be manually executed from a menu or also remote-controlled.
Price and performance
The exceptional specifications, extraordinary features, and best possible processing quality provide the power supplies of the TOE 8950 series with an excellent price/performance ratio.is.
Options
- GPIB, USB, and LAN interfaces
- Arbitrary function
- Interlock
- Inhibit
Special features
- Automatic setting to the existing line voltage: 115 V or 230 V, 47 to 63 Hz
- Autoranging
- RS 232 and analog interfaces included as standard
- USB, LAN, and GPIB interfaces optional
- Outputs at front and rear as standard
- On/off switching of the outputsge
- ½ 19“ weight, 2 HU design parallel installation possible
- Sensing
- Free LabView™ driver
- Can be used as constant voltage, constant current and constant power source (CV/CC/CP)
| Output 1 | Output 2 | ||||
| Modell | Voltage | Current | Voltage | Current | Power |
| Single-output power supplies TOE 8951-20 TOE 8951-40 TOE 8951-60 TOE 8951-80 TOE 8951-130 |
0 - 20 V 0 - 40 V 0 - 60 V 0 - 80 V 0 - 130 V |
0 - 40 A 0 - 20 A 0 - 14 A 0 - 10 A 0 - 6 A |
– – – – – |
– – – – – |
400 W 400 W 400 W 400 W 400 W |
| Dual-output power supplies TOE 8952-20 TOE 8952-40 TOE 8952-60 TOE 8952-80 TOE 8952-130 |
0 - 20 V 0 - 40 V 0 - 60 V 0 - 80 V 0 - 130 V |
0 - 20 A 0 - 10 A 0 - 7 A 0 - 5 A 0 - 3 A |
0 - 20 V 0 - 40 V 0 - 60 V 0 - 80 V 0 - 130 V |
0 - 20 A 0 - 10 A 0 - 7 A 0 - 5 A 0 - 3 A |
2 x 200 W 2 x 200 W 2 x 200 W 2 x 200 W 2 x 200 W |
Outputs
- Floating for all models
- Electrically isolated in the dual-output power supplies
- series and parallel connections possible
- Safety sockets at front
- Available at rear on screw terminal block
Arbitrary function
The power supplies of these series can be optionally equipped with an arbitrary function (curve memory integrated in the unit). The units execute an entered curve autonomously, even without a PC connection. Dual-output power supplies of the TOE 8952 series have a separate curve memory per output. Two signals can then be output synchronous to one another. A burst function defines the number of desired curve sweeps.
In addition, the curve memory can be divided into up to 10 blocks. Each individual block can be used repeatedly. The advantage is to be found in the extremely efficient use of memory space.
The new and powerful software from TOELLNER permits fast and convenient input of curves using a graphic curve editor. Oscilloscope signals recorded in a vehicle can be read in directly and subsequently simulated. Voltage dips, starting processes in the vehicle, and noise voltages on the vehicle electrics can thus be simulated rapidly and without problem. Standardized test pulses in accordance with DIN 16750 or ISO 7637, such as load dump test pulses (also clipped), jump starts and reset response, or specific and standardized test curves from many different vehicle manufacturers, can be simulated and are included in the scope of delivery. New and future versions from manufacturers, as well as new test versions, are implemented can be entered in next to no time.
TOE 9151 or TOE 9152 option required (arbitrary function in the unit) if curves are to be output via internal memories.
Application example
Example of a sinusoidal signal with start block for initialization process, repetition block with a sinusoidal signal and 5 sweeps, and an end block for switching off a consumer.
Display of sequence with output of current block, currently executed step, and number of busts of the current block.
Technical specifications
| Number of steps | 1000 |
| Step data | Voltage, Current, Step time |
| Step time | 10 ms to 100 s, resolution 5 ms |
| Curve triggering Internal External |
Manual with key or over bus with remote control command Via TTL signal or switch contact |
| Number of blocks | 10 |
| Max. block sweeps | 1 bis 65535 bzw.∞ |
Arbitrary function
- 1000 interpolation points
- 10 blocks with repeat function
- 10 ms < t < 100 s per interpolation poin
- Burst function (also for each individual block)
Software for arbitrary function
- Graphic and tabular input of curve
- Data input from oscilloscopes
- Library with standard curves for automotive industry
Curve input options
- Manual
- Via RS 232, GPIB or USB interface
- Convenient TOELLNER software with graphic curve input option
Single-output power supplies
| Output | TOE 8951-20 | TOE 8951-40 | TOE 8951-60 | TOE 8951-80 | TOE 8951-130 |
| Voltage | 0 - 20 V | 0 - 40 V | 0 - 60 V | 0 - 80 V | 0 - 130 V |
| Current | 0 - 40 A | 0 - 20 A | 0 - 14 A | 0 - 10 A | 0 - 6 A |
| Power adjustable in range | 20 - 400 W | 20 - 400 W | 20 - 400 W | 20 - 400 W | 20 - 400 W |
| Setting resolution Voltage Current Power |
5 mV 10 mA 0.1 W |
10 mV 5 mA 0.1 W |
10 mV 2 mA 0.1 W |
20 mV 2 mA 0.1 W |
20 mV 1 mA 0.1 W |
| Setting accuracy Voltage Current Power |
0.1 % + 10 mV 0.2 % + 40 mA 0.4 % + 1 W |
0.1 % + 20 mV 0.2 % + 20 mA 0.4 % + 1 W |
0.1 % + 30 mV 0.2 % + 15 mA 0.4 % + 1 W |
0.1 % + 40 mV 0.2 % + 10 mA 0.4 % + 1 W |
0.1% + 60 mV 0.2 % + 5 mA 0.4 % + 1 W |
| Deviation in regulation with 100 % change in load Voltage Current |
10-4 + 5 mV 5 x 10-4+20 mA |
10-4 + 5 mV 5 x 10-4+10 mA |
10-4 + 5 mV 5 x 10-4 + 7 mA |
10-4 + 5 mV 5 x 10-4 + 5 mA |
10-4 + 5 mV 5 x 10-4+ 2 mA |
| With change in line voltage ± 10 % | 5 x 10-5 | 5 x 10-5 | 5 x 10-5 | 5 x 10-5 | 5 x 10-5 |
| Regulation time with change in load from 20 % to 100 % Irated Tolerance: 0.2 % Urated |
100 μs |
100 μs |
100 μs |
100 μs |
100 μs |
| Setting time of output voltage with change in setpoint 0 V to Vrated no-load/full load Vrated to 1 V no-load/full load |
6 ms/10 ms 30 ms/8 ms |
8 ms/10 ms 50 ms/10 ms |
10 ms/15 ms 100 ms/25 ms |
15 ms/20 ms 200 ms/50 ms |
50 ms/60 ms 1.5 s/400 ms |
| Residual ripple (rms) 10 Hz to 10 MHz Voltage Current |
3 mV 12 mA |
3 mV 10 mA |
6 mV 7 mA |
10 mV 5 mA |
12 mV 2 mA |
| Measuring accuracy Voltage Current Power |
0.1 % + 20 mV 0.2 % + 60 mA 0.4 % + 1 W |
0.1 % + 30 mV 0.2 % + 30 mA 0.4 % + 1 W |
0.1 % + 45 mV 0.2 % + 20 mA 0.4 % + 1 W |
0.1 % + 60 mV 0.2 % + 15 mA 0.4 % + 1 W |
0.1 % + 80 mV 0.2 % + 10 mA 0.4 % + 1 W |
| Temperature coefficient Voltage Current |
10-4/K 10-4/K |
10-4/K 10-4/K |
10-4/K 10-4/K |
10-4/K 10-4/K |
10-4/K 10-4/K |
| Analog interface Control voltage (reference potential is the negative pole of the output) 0 - 5 V for 0 - 5 V for |
0 - 20 V 0 - 40 A |
0 - 40 V 0 - 20 A |
0 - 60 V 0 - 14 A |
0 - 80 V 0 - 10 A |
0 - 130 V 0 - 6 A |
| Protection functions Adjustment range for OVP Adjustment range for limit |
3 - 22 V 0 - 20 V |
3 - 44 V 0 - 40 V |
3 - 66 V 0 - 60 V |
3 - 88 V 0 - 80 V |
3 - 143 V 0 - 130 V |
| Resistant to feedback Voltage Current |
100 V 40 A |
100 V 20 A |
100 V 14 A |
100 V 10 A |
160 V 6 A |
Dual-output power supplies
| Output | TOE 8952-20 | TOE 8952-40 | TOE 8952-60 | TOE 8952-80 | TOE 8952-130 |
| Voltage | 2 x 0 - 20 V | 2 x 0 - 40 V | 2 x 0 - 60 V | 2 x 0 - 80 V | 2 x 0 - 130 V |
| Current | 2 x 0 - 20 A | 2 x 0 - 10 A | 2 x 0 - 7 A | 2 x 0 - 5 A | 2 x 0 - 3 A |
| Power adjustable in range | 2 x 10 - 200 W | 2 x 10 - 200 W | 2 x 10 - 200 W | 2 x 10 - 200 W | 2 x 10 - 200 W |
| Setting resolution Voltage Current Power |
5 mV 5 mA 0.1 W |
10 mV 2 mA 0.1 W |
10 mV 1 mA 0.1 W |
20 mV 1 mA 0.1 W |
20 mV 1 mA 0.1 W |
| Setting accuracy Voltage Current Power |
0.1 % + 10 mV 0.2 % + 20 mA 0.4 % + 1 W |
0.1 % + 20 mV 0.2 % + 10 mA 0.4 % + 1 W |
0.1 % + 30 mV 0.2 % + 7 mA 0.4 % + 1 W |
0.1% + 40 mV 0.2 % + 5 mA 0.4 % + 1 W |
0.1% + 60 mV 0.2 % + 3 mA 0.4 % + 1 W |
| Deviation in regulation with 100 % change in load Voltage Current |
10-4 + 5 mV 5 x 10-4+10 mA |
10-4 + 5 mV 5 x 10-4 + 5 mA |
10-4 + 5 mV 5 x 10-4 + 3 mA |
10-4 + 5 mV 5 x 10-4+ 2 mA |
10-4 + 5 mV 5 x 10-4+ 1.5 mA |
| With change in line voltage ± 10 % | 5 x 10-5 | 5 x 10-5 | 5 x 10-5 | 5 x 10-5 | 5 x 10-5 |
| Regulation time with change in load from 20 % to 100 % Irated Tolerance: 0.2 % Urated |
100 μs |
100 μs |
100 μs |
100 μs |
100 μs |
| Setting time of output voltage with change in setpoint 0 V to Vrated no-load/full load Vrated to 1 V no-load/full load |
6 ms/10 ms 30 ms/8ms |
8 ms/10 ms 50 ms/10 ms |
10 ms/15 ms 100 ms/25 ms |
15 ms/20 ms 200 ms/50 ms |
50 ms/60 ms 1.5 s/400 ms |
| Residual ripple (rms) 10 Hz to 10 MHz Voltage Current |
2 mV 10 mA |
3 mV 5 mA |
6 mV 3 mA |
10 mV 2 mA |
10 mV 1.5 mA |
| Measuring accuracy Voltage Current Power |
0.1 % + 20 mV 0.2 % + 30 mA 0.4 % + 1 W |
0.1 % + 30 mV 0.2 % + 10 mA 0.4 % + 1 W |
0.1 % + 45 mV 0.2 % + 7 mA 0.4 % + 1 W |
0.1 % + 60 mV 0.2 % + 5 mA 0.4 % + 1 W |
0.1 % + 80 mV 0.2 % + 5 mA 0.4 % + 1 W |
| Temperature coefficient Voltage Current |
10-4/K 10-4/K |
10-4/K 10-4/K |
10-4/K 10-4/K |
10-4/K 10-4/K |
10-4/K 10-4/K |
| Analog interface Control voltage (reference potential is the negative pole of the output) 0 - 5 V for 0 - 5 V for |
0 - 20 V 0 - 20 A |
0 - 40 V 0 - 10 A |
0 - 60 V 0 - 7 A |
0 - 80 V 0 - 5 A |
0 - 130 V 0 - 3 A |
| Protection functions Adjustment range for OVP Adjustment range for limit |
3 - 22 V 0 - 20 V |
3 - 44 V 0 - 40 V |
3 - 66 V 0 - 60 V |
3 - 88 V 0 - 80 V |
3 - 143 V 0 - 130 V |
| Resistant to feedback Voltage Current |
100 V 20 A |
100 V 10 A |
100 V 7 A |
100 V 5 A |
160 V 3 A |
| Output Insulation |
Floating and electrically isolated ± 250 V against ground |
| RS 232 Interface Interface Transfer rate Setting rate Measuring rate Software |
9-pin D-SUB connector, electrically isolated from main output 110 to 57.600 Baud Approx. 20 settings/s Approx. 15 measurements/s Command sequence in accordance with IEEE 488.2; SCPI |
| Analog interface Control voltage Input impedance |
0 - 5 V each for 0 - Vmax bzw. 0 - Imax Approx. 10 kOhm |
| Line voltage | 115 V or 230 V ± 10 %, 47 Hz to 63 Hz; the unit sets itself automatically to the existing line voltage |
| Power consumption | Approx. 680 VA |
| Protective measures | Protection class 1 in accordance with DIN EN 61010-1 |
| EMC | EN 61326 |
| Operating temperature | 0 °C to 40 °C |
| Storage temperature | -20 °C bis 70 °C |
| Reference temperature | 23 °C ± 1 °C |
| Dimensions with feet |
224 x 88 x 405 mm (W x H x D) 224 x 103 x 405 mm (W x H x D) |
| 19" system | ½ 19", 2 HU |
| Weight | Approx. 5 kg |
| Housing | Aluminium/steel |
 |
| Rear of unit Dual-output power supply with USB interface TOE 8952 series |
Single-output power supplies
| TOE 8951-20 | Power supply | 20 V / 40 A |
| TOE 8951-40 | Power supply | 40 V / 20 A |
| TOE 8951-60 | Power supply | 60 V / 14 A |
| TOE 8951-80 | Power supply | 80 V / 10 A |
| TOE 8951-130 | Power supply | 130 V / 6 A |
Dual-output power supplies
| TOE 8952-20 | Power supply | 2 x 20 V / 20 A |
| TOE 8952-40 | Power supply | 2 x 40 V / 10 A |
| TOE 8952-60 | Power supply | 2 x 60 V / 7 A |
| TOE 8952-80 | Power supply | 2 x 80 V / 5 A |
| TOE 8952-130 | Power supply | 2 x 130 V / 3 A |
Optional
GPIB interface
| TOE 8951/015 | For TOE 8951-xx |
| TOE 8952/015 | For TOE 8952-xx |
USB interface
| TOE 8951/025 | For TOE 8951-xx |
| TOE 8952/025 | For TOE 8952-xx |
LAN interface + USB interface (not in combination with RS 232 interface)
| TOE 8951/035 | For TOE 8951-xx |
| TOE 8952/035 | For TOE 8952-xx |
Arbitrary function in the unit
| TOE 9151 | For TOE 8951-xx |
| TOE 9152 | For TOE 8952-xx |
PC software for curve generation
| TOE 9751 | For TOE 8951-xx |
| TOE 9752 | For TOE 8952-xx |
Interlock/inhibit options
The interlock and inhibit control options permit external enabling or OFF/ON switching of the main output by means of a switch or a TTL signal.
Interlock option TOE 8950/101
| Control via contact |
Control via TTL-Signal |
Power supply output |
| Close | Low | ON |
| Open | High | OFF |
Interlock option TOE 8950/101
| Control via contact |
Control via TTL-Signal |
Power supply output |
| Close | Low | OFF |
| Open | High | ON |
Cable and adapters
| TOE 9101 | USB/GPIB adpter |
| TOE 9009 | IEEE-488 cable, 2 m |
| TOE 9521 | 19" adapter, 2 HU asymetric for single |
| TOE 9522 | 19" adapter, 2 HU parallel installation set for 2 units |
Supplied accessories
- 1 Power cord
- 1 instruction manual
- 1 RS 232 intercface cable
Free driver for für LabViewTM
 |
| 19" Adapter, TOE 9522 2 HU, parallel installation set for 2 units of the TOE 8950 series |